1. Manuals
  2. Brands
  3. Aeropro Manuals
  4. Nail Gun
  5. ST64X
  6. Manual

Aeropro ST64X Manual

Air nailer
Hide thumbs
1
2
3
4
5
6
7
8
Table of Contents

Advertisement

Quick Links

Download this manual
OPERATING
INSTRUCTIONS
OPERATED BY COMPRESSED AIR
Air Nailer - Concrete nailer
Residual risks
Even when the tool is used as prescribed it is not possible to eliminate all residual risk factors. The following
hazards may arise in connection with the tool's construction and design:
Damage to lungs if an effective dust mask is not worn.
Damage to hearing if effective hearing protection is not worn.
Health defects resulting from vibration emission if the power
tool is being used over longer period of time or not adequately
managed and properly maintained.
Wear eye protection.
Content
FOR
FASTENER
Model No.:ST64X
IMPORTANT:
Read all safety rules and operating
Instructions carefully before first use it.
Keep this Manual for future reference.
DRIVING
8 Spare parts list
TOOLS
2018

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ST64X and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Aeropro ST64X

Summary of Contents for Aeropro ST64X

  • Page 1: Table Of Contents

    INSTRUCTIONS FASTENER DRIVING TOOLS OPERATED BY COMPRESSED AIR Air Nailer – Concrete nailer Model No.:ST64X IMPORTANT: Read all safety rules and operating Instructions carefully before first use it. Keep this Manual for future reference. Residual risks Even when the tool is used as prescribed it is not possible to eliminate all residual risk factors. The following hazards may arise in connection with the tool’s construction and design:...

  • Page 2: Technical Data

    1 Technical data Type of tool ………………………………………………………………………………….… ST64X 90*275*355mm Outline dimension……………………………………………………………….…… 7.27Lbs (3.3kg) Weight (without fasteners)………………………………………… ………..……... Required pressure……………………………………………………………….80-110Psi (5.5-8Bar) Max. pressure……………………………………………………………………….…..120Psi(8.3Bar) Recommended lubricant…………………………………………… …….…….white mineral oil 10＃ 1.1 Fastener Fastener size: Ga14(Φ2.2) 18-64mm (3/4” -2-1/2”) Nail length: Magazine capacity: 70pcs 1.2 Accessories...

  • Page 3: Regulations

    the information given in the operating instructions. stands for mounting the fastener driving tools to a support, for example to a work table, shall be designed and constructed by the stand manufacturer in such a way that the fastener driving tools can be safely fixed for the intended use, thus for example avoiding damage, distortion, displacement.

  • Page 4: Triggering Devices

    caused to the head or to the body in the event of possible recoil consequent upon a disruption in the energy supply or hard areas within the workplace.（see fig 2） Never actuate the fastener driving tool into free space. This will avoid any hazard caused by free flying fasteners and excessive strain of the tool.

  • Page 5: Compressed Air System

    3 Compressed air system WARNING Never free-fire the tool at high pressure. Proper functioning of the fastener driving tool requires filtered, dry and lubricated compressed air in adequate quantities. If the air pressure in the line system exceeds the maximum allowable of the fastener driving tool, a pressure reducing valve followed by a downstream safety valve shall additionally be fitted in the supply line to the tool.

  • Page 6: Filling The Magazine

    connectors. Check for proper functioning by applying the muzzle of the fastener driving tool to a piece of wood or wooden material and actuating the trigger once or twice. 4.3Filling the magazine Only those fasteners specified under TECHNICAL DATA (see 1.1) may be used When filling the magazine, hold the tool so that the muzzle is not pointing towards the operator or any other person or animals.

  • Page 7: Troubleshooting

    6 Troubleshooting (See Table 1) SYMPTOM PROBLEM SOLUTIONS Air leak near top of tool or 1. O-ring in trigger valve is damaged. 1. Check and replace O-ring. in trigger area 2. Trigger valve head are damage. 2. Check and replace. 3.

  • Page 8: Explode Drawing

    7. Explode Drawing &Spare parts list K3 CODE Description Qty. K3 CODE Description Qty. K3 CODE Description Qty. 03.04.05.049 Bolt M6*35 03.04.01.048 O-ring 6.4*2 03.04.04.111-01 Safety nose 03.04.05.265 Spring Washer 03.04.29.005 Valve sleeve 03.04.08.157-01 Driver guide Cylinder cover 03.04.01.060 O-ring 9*1.8 03.04.30.018 Insert bar 03.04.19.167...

Table of Contents