Table of Contents
Advertisement
Quick Links
OPERATING INSTRUCTIONS FOR FASTENER DRIVING TOOLS OPERATED BY COMPRESSED
AIR
34 DEGREE AIR-POWERED FRAMING NAILER
Residual risks
Even when the tool is used as prescribed it is not possible to eliminate all residual risk factors. The following
hazards may arise in connection with the tool's construction and design:
Damage to hearing if effective hearing protection is not worn.
Health defects resulting from vibration emission if the power
tool is being used over longer period of time or not adequately
managed and properly maintained.
Wear eye protection.
TABLE OF CONTENTS:QUICK START GUIDE
TECHNICAL SPECIFIACTIONS
SAFETY GUIDELINES
KEY PARTS DIAGRAM
IMPORTANT INFORMATION
TYPES OF FASTENERS
OPERATING INSTRUCTIONS
MAINTENANCE
TROUBLESHOOTING
EXPLODED VIEW
PARTS LIST
WARRANTY
Framing Nailer ACHF9034
1
Model No.: ACHF9034
IMPORTANT:
Read all safety rules and operating Instructions carefully
before first use it. Keep this Manual for future reference.
2020
www.aeroprotools.com
Advertisement
Table of Contents
Related Manuals for Aeropro ACHF9034
Summary of Contents for Aeropro ACHF9034
- Page 1 OPERATING INSTRUCTIONS FOR FASTENER DRIVING TOOLS OPERATED BY COMPRESSED 34 DEGREE AIR-POWERED FRAMING NAILER Model No.: ACHF9034 IMPORTANT: Read all safety rules and operating Instructions carefully before first use it. Keep this Manual for future reference. Residual risks Even when the tool is used as prescribed it is not possible to eliminate all residual risk factors. The following hazards may arise in connection with the tool’s construction and design:...
-
Page 2: Safety Guidelines
Compressor must be grounded. Do not use grounding adaptors. Risk of personal injury: Do not direct compressed air from the air hose toward the user or other personnel. Risk of inhalation: Never directly inhale the air produced by the compressor. Framing Nailer ACHF9034 www.aeroprotools.com... - Page 3 Potential hazard that may result in moderate injury or damage to equipment. Disconnect tool from the air supply and turn off the compressor before performing any maintenance, or changing accessories, when the tool is not in use, when it is being handed to another person, and when Framing Nailer ACHF9034 www.aeroprotools.com...
-
Page 4: Key Parts Diagram
Potential hazard that could result in serious injury or loss of life. Keep hands and other parts of the body away from the tools discharge and working areas when connecting the air supply. Failure to comply could lead to serious injury or loss of life. Framing Nailer ACHF9034 www.aeroprotools.com... - Page 5 Verify that all of the connections in the air supply system are sealed in order to prevent air from leaking. Description Description Description Air Hose Filter AEROPRO Air powered Framing nailer Quick connector Lubricator Cut-off valve Quick coupler Regulator(0 to 8.3 Bar)
-
Page 6: Methods Of Operation
To avoid double firing or accidental firing due to recoil. 1)Set the switching device to SINGLESEQUENTIAL ACTUATION MECHANISM. 2)Pull the trigger rapidly and firmly. ① Set the switching device to the upward position (to set to SINGLE SEQUENTIAL ACTUATION MECHANISM). Framing Nailer ACHF9034 www.aeroprotools.com... - Page 7 Keep your finger of the rigger except during fastening operation, because serious injury could result if the push lever accidentally contacts you or others in work area. Keep hands and body away from the discharge area. This nailer may bounce from the recoil of driving a fastener Framing Nailer ACHF9034 www.aeroprotools.com...
-
Page 8: Adjusting The Nailing Depth
TECHNICAL DATA). Empty the magazine to prevent a fastener from being ejected at the next stage of work in the event that internal parts of the fastener driving tool are not in the starting position following maintenance and repair work or Framing Nailer ACHF9034 www.aeroprotools.com... - Page 9 Reload the fasteners into the tool magazine. Reconnect the air line to the tool's air inlet Test fire 3 to 5 fasteners into a piece of scrap wood in order to ensure proper operation Framing Nailer ACHF9034 www.aeroprotools.com...
-
Page 10: Maintenance
1. Change and use correct fastener. 2. Damaged or worn driver guide. 2. Check and replace the driver. 3. Magazine or nose screw loose. 3. Tighten the magazine. 4. Magazine is dirty. 4. Clean the magazine. Table 1 Framing Nailer ACHF9034 www.aeroprotools.com... -
Page 11: Exploded View
EXPLODED VIEW Framing Nailer ACHF9034 www.aeroprotools.com... -
Page 12: Parts List
Roll Pin 2.5x16 Oiler Washer Steel Ball goggles Pushing Lever Cover Compressed Spring Manual Note: If you need spare parts of this model, pls feel free to contact us or the distributor where you bought this tool. Thanks! Framing Nailer ACHF9034 www.aeroprotools.com...
Need help?
Do you have a question about the ACHF9034 and is the answer not in the manual?
Questions and answers