Table of Contents
Advertisement
Quick Links
OPERATING INSTRUCTIONS FOR FASTENER DRIVING TOOLS OPERATED BY COMPRESSED
AIR
AIR-POWERED 3-1/2" FRAMING NAILER
Residual risks
Even when the tool is used as prescribed it is not possible to eliminate all residual risk factors. The following
hazards may arise in connection with the tool's construction and design:
Damage to hearing if effective hearing protection is not worn.
Health defects resulting from vibration emission if the power
tool is being used over longer period of time or not adequately
managed and properly maintained.
Wear eye protection.
TABLE OF CONTENTS:QUICK START GUIDE
TECHNICAL SPECIFIACTIONS
SAFETY GUIDELINES
KEY PARTS DIAGRAM
IMPORTANT INFORMATION
TYPES OF FASTENERS
OPERATING INSTRUCTIONS
MAINTENANCE
TROUBLESHOOTING
EXPLODED VIEW
PARTS LIST
WARRANTY
Framing Nailer RHF9021
1
Model No.: RHF9021
IMPORTANT:
Read all safety rules and operating Instructions carefully
before first use it. Keep this Manual for future reference.
2017
Advertisement
Table of Contents
Related Manuals for Aeropro RHF9021
Summary of Contents for Aeropro RHF9021
- Page 1 OPERATING INSTRUCTIONS FOR FASTENER DRIVING TOOLS OPERATED BY COMPRESSED AIR-POWERED 3-1/2” FRAMING NAILER Model No.: RHF9021 IMPORTANT: Read all safety rules and operating Instructions carefully before first use it. Keep this Manual for future reference. Residual risks Even when the tool is used as prescribed it is not possible to eliminate all residual risk factors. The following hazards may arise in connection with the tool’s construction and design:...
- Page 2 Compressor must be grounded. Do not use grounding adaptors. Risk of personal injury: Do not direct compressed air from the air hose toward the user or other personnel. Risk of inhalation: Never directly inhale the air produced by the compressor. Framing Nailer RHF9021...
- Page 3 Disconnect tool from the air supply and turn off the compressor before performing any maintenance, or changing accessories, when the tool is not in use, when it is being handed to another person, and when it is left unattended. Failure to comply may result in moderate injury or damage to equipment. Framing Nailer RHF9021...
- Page 4 Keep hands and other parts of the body away from the tools discharge and working areas when connecting the air supply. Failure to comply could lead to serious injury or loss of life. It is recommended that a filter-regulator-lubricator is used and located as close to the tool as possible. Framing Nailer RHF9021...
- Page 5 Connect the fastener driving tool to the compressed air supply using suitable pressure hose equipped with quick-action connectors. Check for proper functioning by applying the muzzle of the fastener driving tool to a piece of wood or wooden material and actuating the trigger once or twice. 4.3Filling the magazine Framing Nailer RHF9021...
- Page 6 Potential hazard that may result in moderate injury or damage to equipment. Operate the tool with the utmost care when connected with the air compressor. Failure to comply may result in moderate injury or damage to equipment. Framing Nailer RHF9021...
- Page 7 1. Change and use correct fastener. 2. Damaged or worn driver guide. 2. Check and replace the driver. 3. Magazine or nose screw loose. 3. Tighten the magazine. 4. Magazine is dirty. 4. Clean the magazine. Table 1 Framing Nailer RHF9021...
- Page 8 Explosive View and Parts list Issue date: Version no.: Figure number Description Figure number Description Figure number Description Figure number Description Qty. Qty. Qty. Qty. Bumper Bolt M6*45 Switch washer Locating stem Spring washer 6 Sealing washer Bolt M5*25 Urethane Ball Fixed piece Exhaust cover O-ring 62x1.8...
Need help?
Do you have a question about the RHF9021 and is the answer not in the manual?
Questions and answers