Advertisement
Quick Links
OPERATING INSTRUCTIONS FOR FASTENER DRIVING
TOOLS OPERATED BY COMPRESSED AIR
Residual risks
Even when the tool is used as prescribed it is not possible to eliminate all residual risk factors. The
following hazards may arise in connection with the tool's construction and design:
Damage to lungs if an effective dust mask is not worn.
Damage to hearing if effective hearing protection is not worn.
Health defects resulting from vibration emission if the power tool is being used over longer period of time or not
adequately managed and properly maintained.
Wear eye protection.
1
Air Brad Nailer F50RC
AIR-POWERED BRAD NAILER
Model No.: F50RC
IMPORTANT:
Read all safety rules and operating
Instructions carefully before first use it.
Keep this Manual for future reference.
2014
www.aeroprotools.com
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Aeropro F50RC
Summary of Contents for Aeropro F50RC
- Page 1 Damage to hearing if effective hearing protection is not worn. Health defects resulting from vibration emission if the power tool is being used over longer period of time or not adequately managed and properly maintained. Wear eye protection. 2014 Air Brad Nailer F50RC www.aeroprotools.com...
-
Page 2: Safety Guidelines
Note-The word“note” is used to inform the reader of something he/she needs to know about the tool. PERSONAL SAFETY These precautions are intended for the personal safety of the user and others working with the user.please take time to read and understand them. Air Brad Nailer F50RC www.aeroprotools.com... - Page 3 Protect the air hose and the power cord from damage and puncture. Inspect them for weak or worn spots every week, and replace them if necessary . Always wear hearing protection when using the air compressor. Failure to do so may result in hearing loss. Air Brad Nailer F50RC www.aeroprotools.com...
- Page 4 NOTE: Recycle unwanted materials father than disposing of them as waste. Sort the tools, hoses, and package into specific categories and take to the local recycling centre or dispose of them in an environmentally safe way. Air Brad Nailer F50RC www.aeroprotools.com...
-
Page 5: Key Parts Diagram
If a filter-regulator-lubricator in not installed, place up to 6 drops of compressor oil into the inlet plug before each use. If a filter-regulator-lubricator is installed, keep the air filter clean. A dirty filter will reduce the air pressure Air Brad Nailer F50RC www.aeroprotools.com... - Page 6 Verify that all of the connections in the air supply system are sealed in order to prevent air from leaking. Description Description AEROPRO Air powered Brad nailer Regulator(0 to 8.3 Bar) Quick connector Filter Quick coupler Cut-off valve...
- Page 7 The compressed air connectors of the fastener driving tool and the hoses should be protected against contamination, the ingress of coarse dust chips, sand etc, will result in leaks and damage to the fastener driving tool and the couplings. Air Brad Nailer F50RC www.aeroprotools.com...
-
Page 8: Maintenance
Air-operated tools must be inspected periodically, and worn or broken parts must be replaced to keep the tool operating safely and efficiently. Check and change all worn or damaged O-ring, Seals, etc. Tighten all the Air Brad Nailer F50RC www.aeroprotools.com... - Page 9 1.Incorrect or damaged fasteners. 1.Change and use correct fastener. 2.Damaged or worn driver guide. 2.Check and replace the driver. 3.Magazine or nose screw loose. 3.Tighten the magazine. 4.Magazine is dirty. 4.Clean the magazine. Table 1 Air Brad Nailer F50RC www.aeroprotools.com...
- Page 10 If any parts are missing or damaged, or if you have any questions, please contact to rongpeng company. Air Brad Nailer F50RC www.aeroprotools.com...
Need help?
Do you have a question about the F50RC and is the answer not in the manual?
Questions and answers