Table of Contents
Advertisement
Triggering on Video Signals
To trigger on a video signal, first select the standard of
the video signal you are going to measure:
1
Apply a video signal to the red input A.
2
Display the
3
Open the Trigger Options menu.
4
Select Video on A to open the
Trigger on Video menu.
5
Select positive signal polarity for
video signals with negative going
sync pulses.
key labels.
TRIGGER
Triggering on Waveforms
Triggering on Video Signals
Figure 30. Measuring Interlaced Video Signals
6
Select the video standard and
return.
Trigger level and slope are now fixed.
Observe that the key labels at the bottom of the screen
have been changed to allow further selection of specific
video trigger settings:
5
51
Advertisement
Table of Contents
