Making Automatic Scope Measurements - Fluke 196 User Manual

Making Automatic Scope Measurements

The test tool offers a wide range of automatic scope
measurements. You can display two numeric readings:
R 1 and R 2. These readings are selectable
EADING EADING
independently, and the measurements can be done on
the input A or input B waveform
To choose a frequency measurement for input A, do the
following:
1 Display the
2 Open the Reading 1 menu.
3 Select on A. Observe that the
highlight jumps to the present
measurement.
4 Select the Hz measurement.
key labels.
SCOPE
Making Automatic Scope Measurements
Observe that the top left of the screen displays the Hz
measurement. (See Figure 8.)
To choose also a Peak-Peak measurement for Input B as
second reading, do the following:
1 Display the
Open the Reading 2 menu.
2
Select on B. The highlight jumps
3
to the measurements field.
Open the
4
Select the Peak-Peak
5
measurement.
Using The Scope
1
key labels.
SCOPE
menu.
PEAK
13