Husqvarna 1-10DS Operator's Manual page 5

Electrical enclosure and control panel
Electrical enclosure and control panel
overview
1
15
14
13
1. Warning lamp of blastmotor protection/fault in power
supply
2. Indicator lamp of blastmotor
3. Ammeter
4. Hour meter
5. Overdrive button
6. Move foward button
7. Speed control dial
8. ON button for the blastmotor
9. OFF button for the blastmotor
10. Emergency stop button
11. ON/OFF switch
12. ON/OFF button for the work lights
13. OFF button for the control panel
14. ON button for the control panel
15. Indicator lamp of the control panel
Symbols on the product
Warning: This product can be dangerous
and cause serious injury or death to the
operator or others. Be careful and use the
product correctly.
High voltage.
Keep all parts of your body away from hot
surfaces.
2070 - 003 - 16.03.2023
2
3
4
6
5
9
11
12
10
7
8
Note:
Other symbols/decals on the product refer to
special certification requirements for some markets.
Type plate
13
12
11
10
Lifting point.
Keep hands away from rotating parts.
Read the manual carefully and make
sure that you understand the instructions
before you use the product.
Use an approved respiratory protection.
Use approved hearing protection.
Use approved eye protection.
Use approved protective gloves.
Use approved protective boots.
1 2 3 4
5
6
7
8
XX
XX
9
5