Am-Esp-E002-Xxxx / Am-Esp-E001-Xxxx Models - Delta E Series Installation And Maintenance Instructions Manual

Delta Electronics Servo Press E-Series Installation and Maintenance Instructions
3.2.3

AM-ESP-E002-XXXX / AM-ESP-E001-XXXX models

Please use M8x1.25 threads for the punch jig design.
It is recommended to design a neck structure to avoid full-surface contact with the front Loadcell.
Loadcell
Fixed punch
Neck
Caution: The top of the spindle punch is installed with the load cell. Do not assemble tools in a way
that could result in deviations or impacts.
10