Restrictions Of Jig - Delta E Series Installation And Maintenance Instructions Manual

Delta Electronics Servo Press E-Series Installation and Maintenance Instructions
3.2.4
Restrictions of
Punch dimensions and
Extended descriptions and precautions are provided hereunder. See the table below:
Item
Jig weight (Payload)
Center of the
Jig
recommended jig designs are provided in the preceding three sections.
For the weight limits, please follow those shown in the catalog [front-
end load requirements of the spindle]. When the limits are exceeded,
it will result in the spindle moving downwards due to gravity upon
shutdown.
The jig must be designed to overlap the core of the spindle.
jig Otherwise, the partial load phenomenon will damage the loaded
elements.
Description
11