ASL INTERCOM BPC65 Product Manual page 9

2. Slide the batteries into the tray and then connect the interlink cable noting the layout diagram in
Figure 6.
Figure 6 Fitting the batteries into the tray
12V
+
FRONT OF
RACK
(Battery tray for rack with
800 mm depth as example)
3. Fit a protective cap (supplied) to each of the battery terminals connected to the interlink cable.
BPC65 / BDIST / MDIST – Product Manual
-
+
12V
-
U-0456-0143.doc – Issue: 03 complete, approved
! !
! !
! !
! !
Page 9 of 32
Batteries are heavy (23 kg each).
Please move and handle with care to
avoid personal injuries and/or
damages to the batteries.
Always use insulated tools!
Note the correct polarity when
connecting the interlink cable:
Red band terminal=positive
Black band terminal=negative
Fit protective cap to battery
terminals!
(Depending on the model supplied,
the battery terminal protective caps
must be fitted to the lead before its
connection to the battery terminal.)