Table of Contents
Advertisement
•
Do not remove all the ashes. An ash layer in the combustion chamber forms a heat
insulating layer, that helps the fuel to ignite easy.
•
Do not set the control lever in the far left position (all combustion air inlets closed)
when the appliance is used. This will cause severe smoke development, soot
formation and increases the chance of a chimney fire.
•
After the first load, do not overload the appliance with fuel. Refer to section
recommended amount of fuel. Too much fuel leads to incomplete combustion, soot
formation and a chance of a chimney fire.
BOX 30 75
Operation
5.2
for the
17
Advertisement
Table of Contents
