Energizer EZN1800 User Manual page 17

STEP 4
Attach the hose connector to pressure washer. Before attaching the connector to the male fitting, remove the
plastic cap, which is inserted onto the male fitting on the pressure washer before shipping. This plastic cap
can be discarded once removed. After both components have been installed, attach the garden hose with
connector screw on the pressure washer. Connect the garden hose to the water supply.
WARNING!
Ensure water inlet hose is not damaged or leaking, the inner diameter of the hose must not be less than 1/2
inch and the length of the hose must not be longer than 8 metres.
Models:
EZN1800
EZN1800-UK
STEP 5 - INSTALLATION OF THE ACCESSORIES
Install the correct accessories following below operations
Adjustable spray nozzle
Insert the adjustable spray nozzle into the gun. Push and turn the adjustable nozzle anticlockwise onto the
gun and turn it anticlockwise to lock it in place.
To remove the adjustable spray nozzle, turn it clockwise and remove it from the gun.
Models:
EZN2000/EZN2000-UK
EZN2200/EZN2200-UK
17