Energizer EZN1800 User Manual page 9

WARNING!
• In order to avoid any danger due to the accidental reset of
the thermal circuit breaker, this device must not be powered
via an external switch, such as a timer, or be connected to
a circuit which is regularly connected switched on and off by
the electricity supplier.
• The appliance must not be connected to drinkable water
supply.
CAUTION!
• In order to avoid danger due to untimely resetting of the
thermal cut-out, this device must not be powered by an
external switch, such as a timer, or connected to a circuit
that is regularly switched on energized and de-energized by
the electricity supplier.
• When transporting the machine, take note of its weight. Do
not overestimate your efforts and get help if necessary.
• If the machine must be transported from one point to ano-
ther, please disconnect it. Always use the handle to push
the machine.
• Use the handle to lift the machine.
• Improper transport of the machine may result in accidents
and injuries.
• Do not use the tool where dangerous situations or accidents
may occur. Do not use indoors, or in places where there are
exhaust gases, etc.
• In case of an accident or malfunction, stop using the tool,
switch off and unplug. Check the conditions of the tool and
bring it to a service agent for inspection and reparation if
necessary.
• When opening the trigger gun, pay attention to the kickback
force. The power of the gun can cause a kickback and can
produce a loss of control of the gun and create accidents
and injuries. Hold the gun firmly, and with both hands if pos-
sible.
9