Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Energizer eZX1400
Summary of Contents for Energizer eZX1400
- Page 1 USER MANUAL...
- Page 3 Thank you for purchasing your Energizer ® High Pressure Washers This manual will show you the great features of Energizer ® eZX1400/eZX1600/eZX1800/eZX2000/eZX2200...
-
Page 4: Table Of Contents
INDEX CONTENTS 1. IMPORTANT SAFETY PRECAUTIONS 2. SYMBOLS 3. ASSEMBLY INSTRUCTIONS 4. OPERATING INSTRUCTIONS 5. INFORMATION FOR USAGE 6. MAINTENANCE AND STORAGE 7. TECHNICAL DATA 8. TROUBLE SHOOTING TIPS 9. WARRANTY... -
Page 5: Important Safety Precautions
IMPORTANT SAFETY TIPS • Never point the high-pressure nozzle at people or animals. • Never drink alcohol or use drugs while operating the pressure cleaner. • Never operate the pressure cleaner while standing in water. • Never touch the electrical plug with wet hands. •... - Page 6 • Disconnect the power supply before carrying out maintenance by the user. • High pressure cleaners must not be operated by children or unskilled persons. • To ensure machine safety, only original spare parts from the manufacturer or spare parts approved by the manufacturer should be used.
-
Page 7: Symbols
device that will interrupt the supply if the leakage current to earth exceeds 30 mA for 30 ms or a device that will prove the earth circuit. WARNING! Do not use the machine within range of persons unless they wear protective clothing. WARNING! Risk of explosion –... - Page 8 To reduce the risk of injection or injury, never direct a water stream towards people or pets or place any body part in the stream. Leaking hoses and fi ings are also capable of causing injection injury. Do not hold hoses or fi ings. To reduce the risk of injury from kickback, hold the spray lance securely with both hands when the machine is on.
-
Page 9: Assembly Instructions
• CAUTION: The pressure cleaner can be used for a variety of applications including washing cars, boats, patios, decks, garages etc. where high pressure is necessary to remove dirt and debris. High-pressure water flow can damage the work surface if not used properly! See the section titled “Operating Instructions”... - Page 10 1. Accessories holder 7. Extension wand 2. Gun holder 8. Gun 3. Handle 9. Cleaning pin 4. Detergent bo le 10. High pressure hose 5. Water inlet connector 11. Power washer unit 6. Adjustable nozzle 12. Wheel Due to transportation and packaging, some of the accessories may be supplied disassembled. Please follow the assembly instructions.
- Page 11 STEP 3 Install gun holder: Install wheel and screw the accessories holder to the main body as below, the screws will be packed together with the manual, please kindly check and find it when unpacked. Drawing only for reference. STEP 4 A ach the high pressure hose to the pressure cleaner water outlet.
-
Page 12: Operating Instructions
STEP 7 A ach the hose connector to pressure washer. Before a aching the connector to the male fi ing, remove the plastic cap, which is inserted onto the male fi ing on the pressure washer before shipping. This plastic cap can be discarded once removed. A er both components have been installed, a ach the garden hose with connector screw on the pressure washer. -
Page 13: Information For Usage
STARTING UP WARNING! Always turn o the unit's motor before turning o the unit's water supply. Serious damage could occur to the motor if the unit is run without water. 1. Turn on the water supply tap fully. OFF/O OFF/O ON/I 2. - Page 14 THE SAFETY BUTTON OF GUN The operator needs to press the unlock bu on and then actuate the trigger to do the spray operation. When you release the trigger, it can return to the o position automatically. When not using the pressure cleaner, press the lock bu on to keep from accidentally engaging the high pressure spray.
- Page 15 WATER INLET SCREEN The water inlet filter must be inspected regularly, so as to avoid blockage and restriction in the water supply to the pump. Drawing only for reference. ADJUSTABLE SPRAY NOZZLE The adjustable nozzle will allow you to use any variety of spray pa erns from a full fan spray (diagram 1) to a direct stream spray (diagram 2).
-
Page 16: Maintenance And Storage
6. MAINTENANCE AND STORAGE SHUTTING DOWN THE PRESSURE CLEANER When finished using the pressure cleaner, follow these steps to shut down the unit: • Turn the pressure cleaner to the OFF position. Unplug the power cord from the wall outlet. •... - Page 17 CEMENT PATIOS, STONE AND BRICK Rinse cleaning and surrounding area with fresh water. If using detergent, fill the detergent reservoir and apply to the area being cleaned at low pressure. Rinse at high pressure using the fan spray in a sweeping motion keeping the tip of the spray nozzle at least 3-6 inches from the cleaning surface.
-
Page 18: Technical Data
7. TECHNICAL DATA Model: eZX1400 Model: eZX2000 Voltage/Frequency: 220-240V〜50/60Hz Voltage/Frequency: 220-240 V~50-60 Hz Power: 1400 W Power: 2000 W Rated pressure: 80 bar Rated pressure: 110 bar Max pressure: 110 bar Max pressure: 160 bar Rated flow: 330 L/h Rated flow: 390 L/h Max flow: 390 L/h... -
Page 19: Troubleshooting Tips
8. TROUBLESHOOTING TIPS WHEN THE SWITCH IS IN THE “I” POSITION THE MACHINE WILL NOT START. PROBABLE CAUSE SOLUTION Electrical socket is faulty. Check plug, socket, fuses. Voltage is inadequate. Check whether the voltage is adequate. Power cord is not plugged in. Plug in power cord. -
Page 20: Warranty
WARRANTY Product model Date of sale Company Serial number Client's signature Username Please read and agree to the terms of the warranty. The manufacturer warrants the product against faulty materials and workmanship for a period of 1 year from the date of first purchase to the original purchaser. The warranty is applicable when the product is used in a “home owner”... - Page 21 ©2022 Energizer. Energizer, Energizer Character and certain graphic designs are trademarks of Energizer Brands, LLC and related subsidiaries and are used under license by GBR Corporation Ltd.
Need help?
Do you have a question about the eZX1400 and is the answer not in the manual?
Questions and answers