Adjusting The Basic Position Of The Shift Lever - Husqvarna TC 125 2019 Owner's Manual

15 TUNING THE ENGINE
15.10
108

Adjusting the basic position of the shift lever

401950-12
401951-10
–
1
Remove screw with washers and take off shift lever
–
A
Clean gear teeth of the shift lever and shift shaft.
–
Mount the shift lever on the shift shaft in the required position
and engage the gearing.
Info
The range of adjustment is limited.
The shift lever must not come into contact with any
other vehicle components during the shift procedure.
–
Locate and tighten screw
Guideline
Screw, shift M6
lever
1
with washers.
14 Nm (10.3 lbf ft)
®
Loctite
2
.
243™