Prolight Equinox MaxiPar Plus User Manual page 5

4 CHANNEL MODE
Channel Value
1CH 000-255
2CH 000-255
3CH 000-255
4CH 000-255
7 CHANNEL MODE
Value
Channel
1CH 000-255
2CH 000-255
3CH 000-255
4CH 000-255
5CH 000-255
6CH 000-255
000-004
005-080
7CH
081-150
151-255
Function
Red 0-100%
Green 0-100%
Blue 0-100%
UV 0-100%
Function
Master dimmer
Strobe (slow-fast)
Red (0-100%)
Green (0-100%)
Blue (0-100%)
UV (0-100%)
No function
Colour Macro
Colour change (slow-fast)
Colour fade (slow-fast)
4. Optional IR Remote
Button functions:
The "BLACKOUT" button is used to set the LEDs into the power on or off
modes.
The "S PR" button is used to run the built-in programmes. To go though the
built-in programmes, press the "+" and "-" buttons.
The "FL" button is used to set the LEDs to flash on and off, to change the flash
fre-quency use the "+" and "-" buttons.
The "SP" button is used to set the run speed, this button is available only in the
colour change or colour fade modes. To change the speed use the "+" and "-"
buttons.
The "D" button is used to set the LEDs into DMX mode. (See DMX value table)
The "SA" button is used to set the LEDs into sound activated mode.
The "SL" button is used to set the LEDs into slave mode.
The "S", "0", "1", "2", "3", "4", "5", "6", "7", "8" and "9" buttons are used
to set the DMX address for the LED's.