Download Print this page

Dmx 512 Address Setting; How To Control The Unit - Prolight Equinox MaxiPar Plus User Manual

Advertisement

(FA00-99) or
(FF00-99) mode. Once the mode has been selected,
press the ENTER button to confirm.
Auto Mode
Press the MENU button to select
will run a self-test with its built-in programs.
Slave mode
Press the MENU button to select
and
will be showed on the display.
Sound Mode
Press the MENU button to select
display will blink. Use the DOWN and UP buttons to adjust the sound sensitivity
via the value 00-99. Once the value has been selected, press the ENTER
button to confirm.
Channel Mode
Press the MENU button to select the
Channel) mode,
(4 Channel) mode or
DOWN and UP buttons. Once the mode has been selected, press the ENTER
button to confirm.

4. DMX 512 Address setting

Press the MENU button to select
display will blink. Use the DOWN and UP buttons to choose the (A001-A512)
address, press the ENTER button to confirm.

5. How to Control the unit

5.1. Master/slave built-in preprogram function
There is no need to turn the unit off when you change the DMX address as the
new DMX address setting will take effect at once.
. Press the ENTER button and the unit
. Press the ENTER button to confirm
. Press the ENTER button and the
(2 Channel) mode,
(7 Channel) mode via the
. Press the ENTER button and the
5.2. Universal DMX Controller
By using a universal DMX controller to control the units, you will need to set a
DMX address from 1 to 512 so that the units can receive a DMX signal. Press
the MENU button until
button and the display will blink. Use the DOWN and UP buttons to change the
DMX 512 address. Once the address has been selected, press the ENTER
button to confirm.
Please refer to the below diagram to address your first 4 units:
Channel
mode
2 channel
3 channel
4 channel
7 channel
5.3 DMX 512 Configuration
2 CHANNEL MODE
Channel
1CH
(3
2CH
3 CHANNEL MODE
Channel
1CH
2CH
3CH
is showing on the display. Press the ENTER
Unit 1
Unit 2
Unit 3
Address
Address
Address
1
3
1
4
1
5
1
8
Value
Function
000-240
Master dimmer
241-255
Strobe (slow-fast)
000-004
Blackout
005-080
Colour Macro
081-150
Colour Jump (slow-fast)
151-255
Colour Fade (slow-fast)
Value
Function
000-255
Red 0-100%
000-255
Green 0-100%
000-255
Blue 0-100%
Unit 4
Address
5
7
7
10
9
13
15
22

Advertisement

loading

This manual is also suitable for:

Eqled110