Advertisement
l
Weight: 1.05kg
l
Power socket: IEC power input/output
l
XLR sockets: 3-Pin XLR input/output
3. How to set the Unit
3.1 Control Panel
Buttons function of display
MENU
Selects the programming functions
DOWN
To go backward in the selected functions
UP
To go forward in the selected functions
ENTER
Confirms the selected functions
Led display menu
Colour mode
CoLo
Colour Mixing mode
Cn01
Jump mode
Junp
Fade mode
Fade
AUTO
aUTO
Slave mode
SLAV
Cr 00~99 (Red)
CG 00~99 (Green)
Cb 00~99 (Blue)
CU 00~99 (UV)
CF 00~99 (Colour flash speed)
Cn 00~015
JU 00~99
JF 00~99
(Flash speed)
FA 00~99
FF 00~99
(Flash speed)
Sound
SU00
2CH/3CH/4CH/
Channel Mode
7CH
DMX Address
A001
3.2 Main Functions
To select any of the given functions, press the MENU button up to where the
required function is showing on the display. Select the function by pressing the
ENTER button and the display will blink. Use the DOWN and UP buttons to
change the mode. Once the required mode has been selected, press the
ENTER button to confirm.
Colour Mode
Press the MENU button to select
display will blink. Use the DOWN and UP buttons to select the
(Cr00-99) or
(CG00-99) or
(CF 00-99) mode. Once the mode has been selected, press the ENTER
button to confirm.
Colour mixing Mode
Press the MENU button to select
display will blink. Use the DOWN and UP buttons to choose the
(Cn00-15) mode. Once the mode has been selected, press the ENTER button
to confirm.
Jump Mode
Press the MENU button to select
display will blink. Use the DOWN and UP buttons to select the
(JU00-99) or
(JF00-99) mode. Once the mode has been selected,
press the ENTER button to confirm.
Fade Mode
Press the MENU button to select
display will blink. Use the DOWN and UP buttons to select the
SU 00~99 Sensitivity
2/3 channel mode
4/7 channel mode
A001 – A512
Press the ENTER button and the
(Cb00-99) or
(CU00-99) or
. Press the ENTER button and the
Press the ENTER button and the
Press the ENTER button and the
Advertisement
