Advertisement
USER GUIDE
USER GUIDE
SAFETY • INSTALLATION & INTEGRATION • OPERATING INSTRUCTIONS • MAINTENANCE • SERVICE
Integrated Grille Dimensions
PREPARE AND INSTALL INTEGRATED GRILLE
1. Use the dimensions provided in the diagram to cut and
shape your integrated grille panel. Recommended
panel thickness is between 1/4" (6 mm) and 3/8" (9
mm). Height will vary from 3-5/16" (84 mm) to
4-5/16" (110 mm) based on your grille height.
2. Finish or stain your grille panel to match your
surrounding furniture. Finish front, back and edges to
prevent warping. Carefully follow the manufacturer's
recommendations for finish application and cure times.
3. Apply double sided tape to the backside of the
integrated grille. Use the diagram below for reference.
U-Line recommends 3M
strength bonding tape.
Apply Tape To Shaded Area
4. Remove backing paper from double sided tape.
5. Carefully align grille over integrated panel and press
into position.
Integrated Grille Dimensions
™
™
VHB
tape, a high
INTEGRATED GRILLE DIMENSIONS
Integrated Grille - Plinth Dimensions 1
20
u-line.com
Advertisement
