Emerson RXi2 Quick Start Manual page 17

PACEdge in Headless Configuration
In a Remote Headless configuration, the user interfaces with
PACEdge via Ethernet using a separate device's web browser.
Getting Started
1.
Connect the Ethernet cable to the RXi2-BP Ethernet port labeled
ETH0 next to the 24 V power connector.
2.
Setup the User PC Ethernet port IP address to be statically
assigned:
a.
b.
3.
Power up the PACEdge unit (consult the Initial Login section for
details) and wait until it boots.
4.
Open the browser of your choice and type in 192.168.3.100 in
the address bar.
Note: All Ethernet ports are also configured to get IP addresses
assigned by the DHCP server. This dynamically assigned IP address
can also be used to access PACEdge.
5.
Proceed to the Initial Login section.
13
Pv4 Static IP: 192.168.3.10
(or similar in the same subnet)
Netmask: 255.255.255.0
RXi2 - BP Industrial PC Quick Start Guide GFK-3196E