Setting Up A Conference Call; Call On Hold; Activate The Conference Call On Hold - LG G7050 User Manual

General functions
Multiparty or conference calls
The multiparty or conference service provides you with the ability to
have a simultaneous conversation with more than one caller, if your
network operator supports this feature. A multiparty call can only
be set up when you have one active call and one call on hold, both
calls having been answered. Once a multiparty call is set up, calls
can be added, disconnected or separated (that is, removed from
the multiparty call but still connected to you) by the person who set
up the multiparty call. These options are all available from the In-
Call menu. The maximum callers in a multiparty call are five. Once
started, you are in control of the multiparty call, and only you can
add callers to the multiparty call.
Making a second call
You can make a second call while currently on a call. Enter the
second number and press the
connected, the first call is automatically placed on hold. You can
swap between calls by pressing the left soft key then selecting
Swap.

Setting up a conference call

Place one call on hold and while the active call is on, press the left
soft key and then select Conference/Join all.
Putting a conference call on hold
Press the left soft key, then select Conference/Hold all.

Activate the conference call on hold

Press the left soft key, then select Conference/Join all.
Adding calls to the conference call
To add a call to an existing conference call, press the left soft key,
34
key. When the second call is
then select Conference/Join all.
Displaying callers in a conference call
To scroll through the numbers of the callers who make up a
conference call on the handset screen, use the up/down navigation
keys.
Taking a private call during a conference
call
To have a private call with one caller from a conference call,
display the number of the caller you wish to talk to on the screen,
then press the left soft key. Select Conference/Private to put all
the other callers on hold.
Ending a conference call
The currently displayed caller from a conference call can be
disconnected by pressing the
press the left soft key, then select Conference/End multiparty.
After pressing the left soft key, selecting Conference/End all will
end all the active and on-hold calls.
General functions
key. To end a conference call,
35