Turning Your Phone On And Off; Turning Your Phone On; Turning Your Phone Off; Access Codes - LG G7050 User Manual

Getting Started

Turning your phone on and off

Turning your phone ON

1. Install a battery to the handset and connect the phone to an
external power source such as the travel adapter, cigarette
lighter adapter or hands-free car kit. Or install a charged battery
pack to the handset.
2. Press for a few seconds until the LCD screen is turned on.
3. Depending on the status of the PIN code request setting you
may need to enter your PIN code.
Notice Like any other radio devices, avoid any unnecessary
contact with the antenna while your phone is on.

Turning your phone OFF

1. Press for a few seconds until the LCD screen is turned off.
22

Access codes

You can use the access codes described in this section to avoid
unauthorised use of your phone. The access codes (except PUK
and PUK2 codes) can be changed by using the Change codes
feature [Menu 9.6.6]. See page 93.
PIN code (4 to 8 digits)
The PIN (Personal Identification Number) code protects your SIM
card against unauthorised use. The PIN code is usually supplied
with the SIM card. When the PIN code request is set to
Enable, your phone will request the PIN code every time the
phone is switched on. When the PIN code request is set to
Disable, you phone connects to the network directly without the

PIN code.

PIN2 code (4 to 8 digits)
The PIN2 code, supplied with some SIM cards, is required to
access functions such as Advice of Call Charge and Fixed
Dial Number. These functions are only available if supported by
your SIM card. Check with your network for further information.
PUK code (4 to 8 digits)
The PUK (PIN Unblocking Key) code is required to change a
blocked PIN code. The PUK code may be supplied with the SIM
card. If not, contact your network operator for the code. If you lose
the code, also contact your network operator.
PUK2 code (4 to 8 digits)
The PUK2 code, supplied with some SIM cards, is required to
change a blocked PIN2 code. If you lose the code, also contact
your network operator.
Getting Started
23