In-call menu
Muting the Microphone
You can mute the microphone during a call by pressing
the [Mute] key. The handset can be unmuted by pressing
the [Unmute]. When the handset is muted, the caller
cannot hear you, but you can still hear them.
DTMF tones while calling
To switch on DTMF tones while calling (e.g. to use the
phone with an automatic switchboard) press the key
[Options] followed by Send DTMF on. Select DTMF off to
disable DTMF tones. DTMF tones are normally on.
Conference Calls
The conference service provides you with the ability to
have a simultaneous conversation with more than one
caller, if your network service provider supports this
feature. A conference call can only be set up when you
have one active call and one call on hold, both calls
having been answered.
30
Once a conference call is set up, calls may be added,
disconnected or separated (that is, removed from the
conference call but still connected to you) by the person
who set up the conference call. These options are all
available from the In-Call menu. The maximum callers in
a conference call are five. Once started, you are in control
of the conference call, and only you can add calls to the
conference call.
Making a Second Call
You can make a second call while currently on a call.
Enter the second number and press the
When the second call is connected, the first call is
automatically placed on hold. You can swap between
calls, by pressing the
key.
Setting Up a Conference Call
To set up a conference call, place one call on hold and
while the active call is on, press the left soft key and then
select the Join menu of Conference call.
.