Specifications; Sd Card Slot; Connectors - Axis Q8685-E User Manual

Ptz network camera

Hide thumbs Also See for Q8685-E:

Table of Contents

AXIS Q8685–E PTZ Network Camera

Specifications

To find the latest version of the product's datasheet, go to the product page at axis.com and locate Support & Documentation.

NOTICE

TICE

• Risk of damage to SD card. Do not use sharp tools, metal objects or excessive force when inserting or removing the

SD card. Use your fingers to insert and remove the card.

• Risk of data loss and corrupted recordings. Do not remove the SD card while the product is running. Disconnect power

before removal.

This product supports SD/SDHC/SDXC cards.

For SD card recommendations, see www.axis.com

Network connector

RJ45 Ethernet connector.

SFP connector.

I/O connector

Use the I/O connector with external devices in combination with, for example, motion detection, event triggering, and alarm

notifications. In addition to the 0 V DC reference point and power (DC output), the I/O connector provides the interface to:

Digital input - For connecting devices that can toggle between an open and closed circuit, for example PIR sensors, door/window

contacts, and glass break detectors.

Digital output - For connecting external devices such as relays and LEDs. Connected devices can be activated by the VAPIX®

Application Programming Interface or from the product's webpage.

A digital light sensor - For receiving a value of the ambient light intensity from an external light sensor. This is used to control the

product's day and night functionality.

6-pin configurable terminal block

Example

Table of Contents