Chamberlain LA 400PKGU Installation Manual page 53

Residential dc vehicular swing gate operator
Table of Contents

Advertisement

MISCELLANEOUS
REMOTE ANTENNA EXTENSION KIT
The remote antenna extension kit allows the
antenna to be remotely installed.
Model 86LM
WIRELESS ACCESS CONTROL RECEIVER
Access control receiver for up to 450 remote
controls.
Model STAR450-315
PLUG-IN LOOP DETECTOR
Low power. Conveniently plugs into existing control
board.
Model LOOPDETLM
LOOP DETECTOR
Low power loop detectors mounted and wired
separately inside control box. LiftMaster low power
accessory.
Model LD7LP
VEHICLE SENSING PROBE
The vehicle sensing probe is buried in the ground
and can detect a car as it approaches and will then
open the gate.
Model CP3
PUSH-TO-OPEN BRACKET
Used to allow the gate operator to push the gate
open.
Model 50-19503
MAGNETIC GATE LOCK
Outdoor magnetic lock, transformer, junction box,
mounting plate and hardware. Not for use with
Solar Applications. Must be powered separately.
Model MG1300 (12/24 Vdc)
TRANSFORMER
Model APOW3
SOLAR PANEL KIT
This kit is to replace or add a solar panel to the
operator application. 60W maximum for 24 Vdc
operators and 30W maximum for 12 Vdc
operators. Requires a 33AH battery harness.
Models SOLPNL10W12V (10 Watt, 12V),
SP10W12V* (10 Watt, 12V) and SP20W12V*
(20 Watt, 12V)
EXPANSION BOARD
Additional programming features including external
loops, plug-in loops, auxiliary relays, and inputs for
additional controls and entrapment protection
devices.
Model K1D8387-1CC
WIRE HARNESS
Between main control board and expansion board.
Model K94- 34778
ACCESSORIES
BATTERIES
Gate access system batteries replace or upgrade the gate operator
batteries. Two identical 12 Vdc batteries are required for each gate
operator. Do not mix 7AH and 33AH batteries within a gate operator.
* Available end of 2015
51
WIRELESS COMMERCIAL KEYPAD
Durable wireless keypad with blue LED backlight metal
keypad, zinc-alloy metal front cover and 5 year 9V
®
lithium battery. Security+ 2.0
Model KPW250
7AH BATTERIES
Standard 7 AMP-Hour Battery, 12 Vdc, to replace
original batteries provided with operator. Reuse
existing harnesses.
Model 29-NP712
33AH BATTERIES
Upgrade 33 AMP-Hour Battery, 12 Vdc. Ideal for
solar applications and extended battery backup. For
use with Large Metal Control Box ONLY.
Model A12330SGLPK
BATTERY TRAY
Required for 33AH applications.
Model K10-36183)
33AH BATTERY HARNESS
Required for 33AH applications.
Model K94-37236
compatible.

Advertisement

Table of Contents
loading

This manual is also suitable for:

La 400La400dcLa400dcs

Table of Contents