Chamberlain LA 400PKGU Installation Manual page 47

STEP 10 continued...
SOLAR PANEL(S)
INSTALL THE SOLAR PANEL
1. Position solar bracket on mounting surface. Mark and drill holes.
2. Insert two bolts into the track located on the back of the solar
panel(s).
3. Slide bolts in track away from bolt hole and align both bolts.
4. Secure solar panel(s) to solar bracket using two washered nuts.
5. Secure solar panel(s) assembly to mounting surface using appropriate
hardware.
WIRE THE SOLAR PANELS
1. Connect the red wire (+) from one solar panel to the black wire (-) of
the other solar panel.
2. Connect the shorter red wire (+) from the J15 plug (new wire
harness) labeled DC Power to the red wire on one solar panel.
3. Connect the shorter black wire (-) from the J15 plug (new wire
harness) labeled DC Power to the black wire from the other solar
panel.
APPENDIX
Mounting Surface
Mounted Panel
Must Face South
Mounting Surface
+
BATT
J15 Plug
(new wire
harness Model
K94-37236)
Black Wire (-)
Solar Panels
45
DIAGNOSTICS
J15
- - +
DC
POWER
Red Black
Wire (+) Wire (-)
–
Red Black
Wire (+) Wire (-)
–
Red Black
Wire (+) Wire (-)
–
+
Red
Wire (+)
+
+