D-Link DIR-825 User Manual page 39

DIR-825 AC1200 Wave 2 MU-MIMO Wi-Fi Gigabit Router
with 3G/LTE Support and USB Port
User Manual
9. In the opened Wireless Network Connection window, select the wireless network DIR-
825 (for operating in the 2.4GHz band) or DIR-825-5G (for operating in the 5GHz band)
and click the Connect button.
10. In the opened window, enter the network key (see WPS PIN on the barcode label on the
bottom panel of the device) in the Security key field and click the Next button.
11. Allow or forbid your PC to be discoverable by other devices on this network (Yes / No).
12. Wait for about 20-30 seconds. After the connection is established, the network icon will be
displayed as a dot with curved lines indicating the signal level.
If you perform initial configuration of the router via Wi-Fi connection, note that
!
immediately after changing the wireless default settings of the router you will need to
reconfigure the wireless connection using the newly specified settings.
Figure 20. The list of available networks.
Figure 21. PC discovery settings.
Page 39 of 249
Installation and Connection