About This Manual - FLOWTECH flowpress Operation And Maintenance Manual

About this manual

The following pages list the information, specifications, measures and technical data that allow the
relevant personnel to use this product safely and for the intended purpose.
Responsible persons or those engaged by them carrying out the required services must read this
manual attentively and understand it.
Such services include:
Storage, transportation, installation, electrical installation, commissioning and re-starting, operation,
maintenance, inspection, repair and dismantling.
Where the product is to be used in plants/facilities which are not required to comply with local or
harmonised regulations, this document is purely for informative and reference purposes.
As this unit may be subject to unlimited inspection from the local water authority at all times, this
manual must be kept in the immediate vicinity of the installed unit, at least within the confines of the
operations room. Installation classification 2 according to the Annex R of 60730-1
Disregard or lack of attention to the information and measures contained in this manual may pose
a hazard to people, animals, the environment and tangible assets. Failure to observe the safety
regulations and the neglect of other safety measures may lead to significant consequiential loss.
Conventions symbols in this manual
WARNING – Important safety related information intended to prevent injury and/or damage
to the equipment, system or property.
IMPORTANT - Important information intended to ensure that the equipment functions
correctly
USEFUL – Useful information which may be helpful, but is not necessarily required for the unit
to function correctly.
Typography
This manual makes use of different typography to identify different types of information.
Italics
(Round Brackets)
[Square Brackets]
<Inequality symbols>
Safety
This equipment is intended to fill and/or top-up sealed water-based heating and cooling systems,
in which temperature-induced changes in the volume of the system water (the heat transferring
agent) is governed by a separate expansion vessel and safety relief valve.
This product is suitable and appropriate for the operation in heat generating systems according to
BS7074, BSEN 12828, BSEN 12952 and BSEN 12953.
The Principal / Operator, will need to consult with a local authorities on any additional safety
measures that are required.
flowpress
Key words and phrases
Used to identify a button on the digital controller
A parameter on the digital controller
A message/fault code displayed on the digital controller
Direct O&M Manual
5