FLOWTECH flowpress Operation And Maintenance Manual page 3

Safety
Information
It is essential that correct and safe working practices are adhered to at all times when installing, operating
and/or maintaining any piece of equipment. Always consult safety data sheets, operating and maintenance
manuals, Health & Safety legislation and recommendations and specific requirements of any equipment
manufacturer, site controller, building manager or any other persons or organisation relating to the
procurement, installation, operation and/or maintenance of any piece of equipment associated or in
conjunction with any product provided by flowtech Water Solutions.
This document is intended for ALL installers, operators, users and persons carrying out maintenance of this
equipment and must be kept with the equipment, for the life of the equipment and made available to all
persons at all times. Prior to carrying out any work associated with the set it is essential that the following
sheets are read, fully understood and adhered to at all times.
Equipment must only be installed, operated, used, and/or maintained by a competent person. A competent
person is someone who is technically competent and familiar with all safety practices and all of the hazards
involved.
Any damage caused to any equipment by misapplication, mishandling or misuse could lead to risk of
Electrocution, Burns, Fire, Flooding, death or injury to people and/or damage to property dependent upon
the circumstances involved. flowtech Water Solutions accepts no responsibility or liability for any damage,
losses, injury, fatalities or consequences of any kind due to misapplication, mishandling or misuse of any
equipment, or as a result of failure to comply with this manual.
Failure to install, operate, use or maintain the equipment in accordance with the information contained within
this document could cause damage to the equipment and any other equipment subsequently connected
to it, invalidating any warranties provided by flowtech Water Solutions to the buyer.
Safety Warnings &
Precautions
These instructions should be read and clearly understood before working on the system. Please read this
manual carefully and all of the warning signs attached before installing or operating the equipment keep
this manual handy for your reference. This equipment should be installed, adjusted and serviced by trained
and qualified personnel. Failure to observe this precaution could result in bodily injury.
Customer / Contractor
RESPONSIBILITIES
It is the responsibility of the customer and/or the contractor:
•
To ensure that anyone working on the equipment is competent and trained to carry out work on this
equipment and is wearing all necessary protective gear and/or clothing. During maintenance operations
and in any case when the machine is running in various modes, including its normal operating mode,
avoid any clothing or accessories that may get entangled in the moving parts of the machine.
• Is aware of appropriate health & safety warnings.
• Has read the information in this section of the manual.
flowpress
Direct O&M Manual
3