Outdoor Unit Electrical Connections - LG LS243HLV Installation Manual

ELECTRICAL SYSTEM INSTALLATION
6. Using a JIS screwdriver, connect wires as shown at right. See
also indoor unit wiring diagram found on its bottom cover, and
outdoor unit wiring diagram on the inside of its chassis cover.
• Each wire must be individually and securely attached to each
terminal.
•
Loose, damaged, or cracked wires will cause electric shock, bodily in-
jury and / or death.
Loose wires can cause the wiring to burn out, damaging the outdoor unit.
• Secure wiring / cables with cable ties.
• Pay attention to the location / connection of the ground cable.
• Maintain a minimum of 1/4 inches of wire length from terminal block to cable bundle.
7. When finished, reattach the conduit cover to the outdoor unit with the screws.
50
Due to our policy of continuous product innovation, some specifications may change without notification.
©LG Electronics U.S.A., Inc., Englewood Cliffs, NJ. All rights reserved. "LG" is a registered trademark of LG Corp.
Figure 81: HLV Outdoor Unit Electrical Connections.