[dw_2zeauf-020414-01, 1, --_--]
Figure 5-7
(1)
Extreme right expansion module of the 1st device row
(2)
Connecting cables
(3)
2nd device row
[dw_winauf-020414-01, 1, --_--]
Figure 5-8
(1)
2 fastening screws
(2)
Adaptor angle
(3)
Sealing plate
(4)
Device bus of the outermost left expansion module of the 1st device row
Installation and Commissioning
Reinstall the plastic screw covers.
²
Refasten the terminal blocks and the necessary communication lines.
²
Connect the current and voltage blocks of the expansion module.
²
Connect any available plug-in modules.
²
Use the supplied grounding cable to connect the expansion module with the device and reconnect the
²
device to service ground.
SIPROTEC 5, Hardware Description, Manual
C53000-G5040-C002-M, Edition 12.2021
Expansion with 2nd Device Row (View of the Installation Level without Showing the On-Site
Operation Panel)
Sealing Plate and Adaptor Bracket for the Expansion Module of the 1st Device Row
Working on the Device
5.2 Expanding Modular Devices
193