Ordering Spare Parts And Accessories; Order Configurator And Order Options; Ordering Accessories - Siemens SIPROTEC 5 V8.83 Manual

Ordering Information

7.1 Ordering Spare Parts and Accessories

7.1 Ordering Spare Parts and Accessories

Order Configurator and Order Options

7.1.1
Order Configurator
The order configurator assists you in the selection of SIPROTEC 5 products. The order configurator is a Web
application that can be used with any browser. The order configurator can be used to configure complete
devices or individual components, such as communication modules, expansion modules, or other accessories.
At the end of the configuration process, the product code and a detailed presentation of the configuration
result are provided. The product code unambiguously describes the selected product and also serves as an
order number.
Ordering Options
The following ordering options are possible for SIPROTEC 5 products:
•
Device
•
Single part
•
DIGSI 5
•
Functional enhancement
NOTE
i
i
To order single parts in the order configurator, use the Single part link.
Individual parts are:
•
Expansion module
•
Plug-in module
•
Sensors for arc protection
•
Operation panel
•
Terminal
•
Accessories

Ordering Accessories

7.1.2
NOTE
i i
To order terminals, terminal accessories, and mechanical accessories in the order configurator, use the
Single part link.
Table 7-1
Group
Terminal
Terminal
Terminal
35 Recommended tightening torque when screwing down the terminal on the rear plate: 0.3 Nm
280
Accessories
Accessories
Voltage terminal, terminal block, 14-pole
Voltage terminal (power supply)
35
Terminal block, 2-pole
Type A current terminal, 4 x protection
(for modular devices)
SIPROTEC 5, Hardware Description, Manual
C53000-G5040-C002-M, Edition 12.2021