Listening To Cd 1 - Teac SR-L100 Owner's Manual

1
1 Press the CD button to select "CD".
When no disc is set, "NODISC" appears
on the display.
< You can also use the Play/Pause button
(y/J) to select "CD". If a disc is already
installed, playback will start.
2
Press the OPEN/CLOSE mark (L) to
open the disc cover.
3 Put a disc onto the center spindle of
the player with the label side up.
Press the disc onto the spindle until a
slight "click" is heard indicating the disc
is mounted correctly.
20

Listening to CD 1

3
2
4 5
< Never put more than one disc in the
mechanism at a time.
< Ensure that the disc is correctly mounted
on the spindle and locked in place.
4
Gently close the disc cover by hand.
When closing, press the OPEN/CLOSE
mark (L).
< It takes a few seconds for the unit to
load the disc. No buttons will work
during loading. Wait until the total
number of the tracks is displayed.
total play time of the disc
total number of the tracks
5
Press the Play/Pause button (y/J) to
start playback.
elapsed time of current track
current track number
Playback starts from the first track of the
disc.
< When the playback of all the tracks has
finished, the unit stops automatically.