Installation ................................... 5 Set Up and Operation ............................... 6 Setup example ................................6 Frequency and Polar Diagrams ..........................7 Connection Cables ................................8 Compensation of Interference with Balanced Connections ................9 Maintenance ..................................9 Troubleshooting ................................. 9 Product Specifications ..............................10 Ordercode: D1356...
Please consider that damages caused by manual modifications to the system are not subject to warranty. This system contains no user-serviceable parts. Refer servicing to qualified technicians only. Ordercode: D1356...
UK Cable US Cable BROWN YELLOW/COPPER PHASE BLUE BLACK SILVER NEUTRAL YELLOW/GREEN GREEN GREEN PROTECTIVE GROUND Make sure that the device is always connected properly to the earth! Improper installation can cause serious damage to people and property! Ordercode: D1356...
After this period complaints will not be handled anymore. Complaints will only then be considered if the client has so far complied with all parts of the agreement, regardless of the agreement of which the obligation is resulting. Ordercode: D1356...
Remove all packing materials from the DM-35. Check if all foam and plastic padding is removed. Connect all cables. Always disconnect from electric mains power supply before cleaning or servicing. Damages caused by non-observance are not subject to warranty. Ordercode: D1356...
Fig. 02, page 6. Once positioned use your ear to find the optimum position. Moving the microphone in the direction of the dust cap will increase the brilliance of the signal. Moving the microphone towards the edge of the speaker will decrease the brilliance, and the sound will become warmer. Ordercode: D1356...
Unbalanced Balanced Headphones Insert For these applications the unit provides 1/4" TRS and XLR connectors to easily interface with most professional audio devices. Follow the configuration examples below for your particular connection. Ordercode: D1356...
02) Check power from the wall, all cables, connections, etc. 03) If all of the above appears to be O.K., plug in the unit again. 04) If nothing happens after 30 seconds, unplug the device. 05) Return the device to your DAP Audio dealer. Ordercode: D1356...
200 Ω Connections: 1 x 3-pin XLR OUT Accessories: gooseneck clamp, mic clip, pouch Max. ambient temperature t 40°C Max. housing temperature t 80°C Design and product specifications are subject to change without prior notice. Website: www.Dap-audio.info Email: service@highlite.com Ordercode: D1356...