Page 1
EM-193B ORDERCODE D145173B ORDERCODE D145182B Highlite International B.V. Vestastraat 2 6468 EX Kerkrade The Netherlands...
Page 2
Congratulations! You have bought a great, innovative product from DAP Audio. DAP Audio EM-193B brings excitement to any venue. Whether you want simple plug-&-play action or a sophisticated show, this product provides the effect you need. You can rely on DAP Audio, for more excellent audio products. We design and manufacture professional audio equipment for the entertainment industry.
Warning CAUTION! Keep this system away from rain and moisture! FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY BEFORE YOUR INITIAL START-UP! Unpacking Instructions Immediately upon receiving this product, carefully unpack the carton and check the contents to ensure that all parts are present, and have been received in good condition.
Avoid flames and do not put close to flammable liquids or gases. Make sure you don’t use the wrong kind of cables or defective cables. Please turn off the power switch, when changing the power cord or signal cable, or select the input mode switch.
Description of the device Features The EM-193B is a professional wireless microphone from Dap Audio. There are two fequency ranges available: D145173B, frequency range 740 – 764 Mhz D145182B, frequency range 822 – 846 Mhz • 193 Selectable frequencies. • Dynamic, moving coil.
Set Up and Operation Before turning the EM-193B on, always make sure that the frequency matches your country. Placing the batteries ) Unscrew the grill of the microphone counter clockwise and take the plastic cover off from the back. 2) Once you have removed the grill. You see a small lip, which you have to push. 3) Pull out the battery holder.
Changing the frequency of the transmitter 1) Press and hold the set(1) button for 3 seconds. The display shows FREQUE. After a second, the display shows the actual frequency while the MHz symbol blinks. 2) Use the up(3) and down(2) buttons to select the desired frequency. 3) Press the set(1) button again to store the setting.
Approval The DAP D145173B and the D145182B are Class II wireless devices. D145173B: 740-764 MHz for use in: Austria, Belgium, Denmark, France, Luxemburg, Netherlands, Poland, Sweden, Switzerland, Turkey. D145182B: 822–846 MHz for use in: Germany, France, Luxemburg, Poland, Turkey. Exclusion of liability The frequency tables in this publication are made according to national laws and regulations.
Maintenance The DAP Audio EM-193B requires almost no maintenance. However, you should keep the unit clean. Disconnect the mains power supply, and then wipe the cover with a damp cloth. Do not immerse in liquid. Do not use alcohol or solvents. Keep connections clean.
Need help?
Do you have a question about the D145173B and is the answer not in the manual?
Questions and answers