Siemens SIMATIC NET CP 5613 Manual page 164

Description of the DP Functions, Data, and Error Codes
Description of the Bus Parameters
ts
baud_rate
tsl
min_tsdr
max_tsdr
tqui
tset
ttr
g
hsa
max_retry_limit
station_type
trdy
BpFlag
MinSlaveInterval
PollTimeout
DataControlTime
164
Name
Local station address
Data transmission rate
DP_M_BAUDRATE_9K6
DP_M_BAUDRATE_19K2
DP_M_BAUDRATE_93K75
DP_M_BAUDRATE_187K5
DP_M_BAUDRATE_500K
DP_M_BAUDRATE_750K
DP_M_BAUDRATE_1M5
DP_M_BAUDRATE_3M
DP_M_BAUDRATE_6M
DP_M_BAUDRATE_12M
DP_M_BAUDRATE_31K25
DP_M_BAUDRATE_45K45
Slot time (in bit times)
Minimum station delay (in bit times)
Maximum station delay (in bit times)
Modulator quiet time (in bit times)
Setup time (in bit times)
Target rotation time (in bit times)
GAP update factor
Highest (station) PROFIBUS address
Maximum number of call retries
0 (master)
READY time (in bit times)
Bit 7=0 means:
occurs
Bit 7=1 means:
Bit 6 to 0:
see Section 3.2 (unit: 1 ms)
Monitoring time for communication with a master class
2 (unit: 10 ms)
see Section 3.2 (unit: 10 ms)
Meaning
Value
no mode change if an error
mode change if error occurs
(AUTOCLEAR)
reserved
DP Base Programming Interface for CP 5613/CP 5614
Meaning
9.6 Kbps
19.2 Kbps
93.75 Kbps
187.5 Kbps
500 Kbps
750 Kbps
1.5 Mbps
3 Mbps
6 Mbps
12 Mbps
31.25 Kbps
45.45 Kbps
C79000-G8976-C108-02