IBM Aptiva 2187 Service Manual page 42

Service level a
Table of Contents

Advertisement

Multimedia
One pair of internal speakers.
Power Management
Compliant to ACPI and supports display power management signaling
(DPMS) monitor.
Software shutdown by Windows 98.
System enters standby mode if any of following conditions are met:
Execute standby from the Windows 98 Start menu
Press system power button if it is set to act as standby function.
See "Power Management Setup on page 1-19.
Standby timer set in the Windows 98 power utility timer elapses
without system activity.
Monitor enters standby mode if:
Windows 98 power utility timer elapses
System sleep timer elapses
Power Supply
95-watt switchable high/low voltage power supply.
Standard SFX power supply with +5V and +3.3V standby power
Internal Cabling
Two 40-pin ribbon cables for hard disk drive and CD-ROM drive.
One 34-pin ribbon cable for AT diskette drive.
One 4-pin (2-wire) cable for hard disk drive light-emitting diode (LED).
One 3-pin (3-wire) cable for power light-emitting diode (LED).
One 2-pin (2-wire) cable for power switch.
One 16-pin game port cable.
1-4

Advertisement

Table of Contents
loading

Table of Contents