Table of Contents
Advertisement
To view two pictures simultaneously – Twin
Picture
You can view two pictures (external input and TV
programme) on the screen simultaneously.
Connect the optional equipment (page 14, 15) and
make sure that images from the equipment appear on
the screen (page 17).
~
• This function is not available for a PC input source.
• You cannot change the size of the pictures.
• The picture on the right cannot be displayed and no sound
when the viewed external input is Video 1 or S Video 1,
Video 2, or Video 3.
• The picture and sound from the monitor output jacks
(refer G in page 15) will follow the left picture.
/
However, if audio output jacks
are connected, the sound will follow TV speaker.
1
Press TOOLS to display the Tools menu.
2
F
f
Press
/
to select "Twin Picture", then
press
.
The picture from connected equipment is
displayed on the left and the TV programme is
displayed on the right.
3
Press number buttons or PROG +/- to
select the TV channel.
To return to single picture mode
Press
or RETURN.
z
The picture framed in green is audible. You can switch the
audible picture by pressing
To view two pictures simultaneously - PIP
(Picture in Picture)
You can view two pictures (PC input and TV
programme) on the screen simultaneously.
Connect a PC (page 14, 15) and make sure that images
from a PC appear on the screen (page 17).
~
• You cannot display resolutions higher than WXGA (1360
× 768 pixels).
• "Power Management" is not available in PIP mode
(page 29).
• The sound will follow TV speaker when audio output
(refer I in page 15) are connected.
jacks
1
Press TOOLS to display the Tools menu.
2
F
f
Press
/
to select "PIP", then press
The picture from the connected PC is displayed with
full size and the TV programme is displayed on the
bottom right corner.
F
f
G
You can use
/
/
screen position.
3
Press number buttons or PROG +/- to
select the TV channel.
To return to single picture mode
Press RETURN.
z
You can switch the audible picture by selecting "Audio
Swap" from the Tools menu.
18
GB
(refer I in page 15)
G
g
/
.
g
/
to move the TV programme
Using HDMI control
The HDMI control function allows equipment to
control each other using HDMI CEC (Consumer
Electronics Control) specified by HDMI.
You can perform interlocked control operations
between Sony HDMI control compatible equipment
such as a TV, DVD recorder with hard disk and audio
system by connecting the equipment with HDMI
cables.
Be sure to correctly connect and set the compatible
equipment to use the HDMI control function.
To connect the HDMI control compatible
equipment
Connect the compatible equipment and the TV with a
HDMI cable. When connecting an audio system with
HDMI jack, be sure to also connect to the audio output
(refer I in page 15) to listen to the sound
jacks
from the TV on audio system. For details, see page 14
and 15.
To make the HDMI control settings
HDMI control must be set on both the TV side and the
connected equipment side. See "HDMI Set-up"
(page 27) for the TV side settings. See the operating
instructions of the connected equipment for setting
details.
HDMI interlock control functions
• Turns the connected equipment off automatically
when the TV is turned off.
• Turns the TV on automatically when the connected
equipment is turned on. TV automatically switches
to the input in which the equipment is connected
when the equipment starts to play.
• If you turn on a connected audio system while the
TV is on, the input switches to the audio from the
audio system.
• Adjusts the volume and mutes the sound of a
connected audio system.
.
Advertisement
Table of Contents
