Table of Contents
Advertisement
Sound menu
Sound Booster
Speaker Link
Target Inputs
Sound Mode
Reset
Treble
Bass
Balance
Intelligent Volume
Volume Offset
Surround
Sound Booster
22
GB
Mono
On
Selects whether to apply settings made in the "Sound" menu to all inputs, or only to
the input currently being watched.
"All": Applies settings to all inputs.
"Viewing Only": Applies settings only to the current input.
"Dynamic": Enhances treble and bass.
"Standard": For standard sound. Recommended for home entertainment.
"Custom": Flat response.
Resets all the "Sound" settings except "Target Inputs", "Sound Mode", "Dual
Sound" and "i Speaker Link" to the factory settings.
Adjusts higher-pitched sounds.
Adjusts lower-pitched sounds.
Emphasizes left or right speaker balance.
Keeps a constant volume level even when volume level gaps occur (e.g., adverts tend
to be louder than programmes).
Adjusts the volume level of the current input relative to other inputs, when "Target
Inputs" is set to "Viewing Only".
"S-FORCE Front Surround": Available for normal stereo broadcast and 5.1ch
digital broadcast surround audio, and the audio input from connected equipment.
"Simulated Stereo": Adds a surround-like effect to mono programmes.
"Off": Converts and reproduces 5.1ch and other digital broadcast surround audio as
normal stereo audio (2ch). Reproduces the original audio of other broadcasts as it is.
Gives sound more impact by compensating for phase effects in speakers.
Choose either "High", "Low" or "Off".
~
"Sound Booster" is available when "Sound Mode" is set to "Custom".
You can select the options listed below on the
"Sound" menu. To select options in "Settings", refer
to "Navigating through menus" (page 19).
Advertisement
Table of Contents
