Using Bravia Sync With Control For Hdmi - Sony KLV-32V530A Service Manual

To set the duration of displaying a
photograph
Press OPTIONS, then select "Duration"
and press . Then, select the duration,
and press .
The duration appears on the screen.
To return to the XMB™
Press RETURN.
~
• If the photograph is selected from a USB device, it
must remain connected to the TV.
• If "Sleep Timer" is activated, the TV will
automatically switch into standby mode.
Using BRAVIA Sync with
Control for HDMI
The control for HDMI function enables the TV
to communicate with the connected equipment
that is compatible with the function, using
HDMI CEC (Consumer Electronics Control).
For example, by connecting Sony equipment
that is compatible with control for HDMI
(with HDMI cables), you can control them
together.
Be sure to connect the equipment correctly,
and make the necessary settings.
Control for HDMI
• Automatically turns the connected
equipment off when you switch the TV to
standby mode using the remote.
• Automatically turns the TV on and
switches the input to the connected
equipment when the equipment starts to
play.
• If you turn on a connected audio system
while the TV is on, the sound output
switches from the TV speaker to the audio
system.
• Adjusts the volume (2 +/–) and mutes the
sound (%) of a connected audio system.
• You can operate the connected Sony
equipment that has the BRAVIA Sync logo
by the TV remote by pressing:
– N/x/X/m/M to operate the connected
equipment directly.
– SYNC MENU to display the menu of the connected
HDMI equipment on the screen.
After displaying the menu, you can operate the
menu screen by using F/f/G/g,
and RETURN.
22
GB
• If "Control for HDMI" of the TV is set to
To connect the equipment that is
compatible with control for HDMI
Connect the compatible equipment and the TV
with an HDMI cable. When connecting an
audio system, be sure to also connect the audio
output jacks
to the sound from the TV on audio system.
To make the control for HDMI settings
The control for HDMI settings must be set on
both the TV side and connected equipment
side. See "HDMI Set-up" (page 30) for the
TV side settings. For settings on the connected
equipment, refer to the operating instructions
for that equipment.
, colour buttons
– OPTIONS to display "Device Control", then select
options from "Options" and "Content List" to
operate the equipment.
– Refer to the instruction manual of the equipment for
available control.
"On" "Control for HDMI" of the
,
connected equipment is also automatically
switched to "On".
(refer
1
in page 18) to listen