Table of Contents
Advertisement
General
The TV turns off automatically (the TV enters
standby mode)
• Check if the "Sleep Timer" is activated, or confirm the
"Duration" setting of "On Timer" (page 27).
The TV turns on automatically
• Check if the "On Timer" is activated (page 27).
Some input sources cannot be selected
• Select "Video Labels" in the "AV Set-up" menu and
cancel "Skip" of the input source (page 26).
The remote does not function
• Replace the batteries.
The "Store Display Mode: On" message appears
on the screen
• Select "All Reset" in the "Set-up" menu (page 28).
The wide screen mode changes spontaneously
when "Auto Wide" is "On"
• During a transition between two programmes, the TV
detects the optimum wide screen mode. During this
period, an irregular wide screen mode may appear.
• The wide mode is switched automatically according to the
revised signal with a Wide ID signal.
• The "Auto Wide" feature stops working temporarily when
you press
, and resumes after a while. To fix in the
manually selected wide screen mode, set "Auto Wide" to
"Off" in the "Screen" menu (page 24).
Text display is incomplete or garbled
• Your area may not be able to receive Text. Text is
displayed only in the area that is covered by Text services.
• The antenna connection is loose or the antenna cable is
damaged. Check the cable and connection on the TV,
VCR, and on the wall (page 4).
• Adjust the antenna direction. Contact a Sony dealer for
advice.
• Signal transmission is too low. Try using a booster.
• Using the fine tuning ("AFT") function may improve the
picture (page 31).
Cannot play shooting games
• Some shooting games which involve pointing a light beam
at the TV screen with an electronic gun or rifle cannot be
used with your TV. For details, see the instruction manual
supplied with the video game software.
The TV cabinet creaks
• Changes in room temperature sometimes make the TV
cabinet expand or contract, causing a noise. This does not
indicate a malfunction.
Static discharge is felt when touching the TV
cabinet
• This is the same static discharge that is felt when touching
metal door handles or car doors especially when the air is
dry, for example in winter. This does not indicate a
malfunction.
Weak signal (signal level indicator displayed in
red)
• Check the antenna/cable connection.
• Set the "Signal Booster" to "Auto" (page 31) or try using
an external booster.
35
GB
Advertisement
Table of Contents
