Pc Settings Menu - Sony BRAVIA KLV-46D300A Operating Instructions Manual

PC Settings menu

Wide Mode
Reset
Auto Adjustment
Phase
Pitch
Horizontal Shift
Vertical Shift
Power Management
z
You can refer to PC Input Signal Reference Chart (page 33) for supported signals and "Resolution:" value displayed.
Off
Selects a screen mode for displaying input from your PC.
"Normal": Displays the picture in its original size.
"Full 1": Enlarges the picture to fill the display area, keeping its original horizontal-
to-vertical aspect ratio.
"Full 2": Enlarges the picture to fill the display area.
Resets all the "PC Settings" except "Wide Mode" and "Power Management" to the
factory settings.
Automatically adjusts the display position and phase of the picture when the TV
receives an input signal from the connected PC.
z
"Auto Adjustment" may not work well with certain input signals. In such cases, manually
adjust "Phase", "Horizontal Shift" and "Vertical Shift".
Adjusts the phase when the screen flickers.
Adjusts the pitch when the picture has unwanted vertical stripes.
Adjusts the horizontal position of the picture.
Adjusts the vertical position of the picture.
Switches the TV to standby mode if no signal is received for 30 seconds.
You can select the options listed below on the "PC
Settings" menu. To select options in "Settings", refer
to "Navigating through menus" (page 19).
29
GB