Bravia; With Control For Hdmi - Sony BRAVIA KDL-65W5100 Operating Instructions Manual

BRAVIA ®
Sync TM
with Control for HDMI
The BRAVIA Sync function allows this TV to communicate with other Sony equipment
supporting the Control for HDMI function.
To connect Sony equipment with Control for HDMI
Use an HDMI cable that bears the HDMI logo for connection.
Line up the triangle on the head of the HDMI cable with the triangle on the label of the HDMI
input when connecting the HDMI cable.
Setting the Control for HDMI
The Control for HDMI function
must be set
up in order for the TV
to
communicate with other
Control for HDMI enabled equipment.
To setup the TV's Control for HDMI:
1
Select Channels & Inputs on the Settings menu.
2 Highlight HDMI
Settings
and press @.
3
Select Control for HDMI and set it to On.
To verify connected devices, select Device List from the HDMI Settings menu.
For other equipment, refer to its operating instructions.
Available options using Control for HDMI
The following operations are available after you connect the supported Sony equipment with
Control for HDMI function to your TV:
• Automatically turn oft"the connected equipment when you turn oft"the TV.
• The connected equipment and TV are turned on by One-Touch-Play.
• Possible operations with BRAVIA Sync buttons, see page 18.
When a Sony A/V receiver with BRAVlA Sync is connected, the following additional operations
are possible:
• Turning on the A/V receiver when the TV is turned on.
• Automatically switching to the audio output of the A/V receiver's attached speakers.
• Adjusting the volume and muting of the A/V receiver with the TV's remote control.
"'4
35