LAVAZZA Firma INOVY MINI Instructions Manual page 34

EN
During breaks, empty the container used to col-
lect the solution
Repeat the steps described in points
until the water tank is completely empty.
Proceed with the rinsing cycle.
Rinsing cycle
Remove the water tank, rinse and wash it accu-
rately.
Fill it with drinking fresh non-carbonated water up
to the MAX level.
Fit the tank with the fresh water back into the ma-
chine.
Place a suitable container under the spout.
34
MAINTENANCE AND CLEANING
and
Press the FREE DOSE supply buttons then sup-
ply the full content of the tank.
Empty the container and place it again under the
dispenser.
Upon completion of the rinsing cycle, perform
one more rinsing cycle.
Remove the water tank, rinse and wash it accu-
rately.
Fill it with drinking fresh non-carbonated water up
to the MAX level.
Put the tank back in place on the machine.
Clean the machine by means of a moist, soft
cloth.
After cleaning the machine, the descaling process
will be over. The machine will be ready for use.