Decals And Antiskid - Braun NVL Vista 2 Series Operator's Manual

Public use wheelchair lifts
Hide thumbs Also See for NVL Vista 2 Series:
Table of Contents

Advertisement

W ARNING
Replace missing, worn
or illegible decals.
Failure to do so may
result in serious bodily
injury and/or property
damage.
Note: Clean surfaces as
detailed on page 38 before
posting decals.
25675
W ARNING
Lift installation and servicing prohibited by
anyone who has not been certified by The Braun
Corporation Sales and Service School. Certified
service technicians should call 1-800-THE LIFT
to receive applicable installation/service manual.
Failure to follow this policy may result in serious
bodily injury and/or property damage.
Page 36

Decals and Antiskid

The lift is only as safe as
the operator. Replace any
missing, worn or illegible
decals! Part numbers are
provided for decals. In-
spect your lift for missing,
worn or illegible decals.
Call 1-800-THE LIFT
replacements.
OPERATING
INSTRUCTIONS
Read warnings and operate
21494
lift as outlined on LIFT
OPERATING INSTRUCTIONS
decal. Lift operating
instructions apply to wheelchair
passengers and standees.
LIFT POWER
Standees: Standees must
ON
stand at center of platform
(fully inside yellow boundaries),
grip handrails and lower head.
Interlocks: Interlocks vary in
type and operation. Interlocks
must be operational as defined
in NHTSA Operations Checklist.
OFF
25675
21494
Decals
34281
®
for
31045
34281
DOT — Public Use Lift
31045
30695
W ARNING
• Read manual before operating
lift.
• Load and unload on level
surface only.
32940
• Engage vehicle parking brake
before operating lift.
• Provide adequate clearance
outside of vehicle to
accommodate lift.
• Do not operate lift if you
suspect lift damage, wear or
any abnormal condition.
MANUAL
• Keep operator and bystanders
clear of area in which lift
operates.
OPERATION
Whenever a wheelchair
passenger is on the platform,
the:
• Passenger must be
positioned fully inside
yellow boundaries
Using hand pump handle:
• Wheelchair brakes must
be locked
TO UNFOLD PLATFORM:
• Inner roll stop and outer
barrier must be up
Failure to follow these rules
1. Close hand pump valve
may result in serious bodily
(turn clockwise).
injury and/or property damage.
2. Insert handle in pump
and stroke until platform
LIFT OPERATING
folds fully (stops).
INSTRUCTIONS
3. Open hand pump valve
(turn counterclockwise)
OPEN DOOR(S) AND SECURE
until platform reaches
TO UNFOLD PLATFORM:
floor level. Open
1/2 turn only.
Stand clear and press
UNFOLD switch until
4. Close hand
platform stops (reaches
OPEN
pump
floor level).
valve (turn
Note: In event platform
clockwise).
does not unfold, press
CLOSE
FOLD switch to release
Lift-Tite™ latches.
DOWN (TO LOWER):
TO UNLOAD PASSENGER:
Open hand pump valve (turn
1. Load passenger onto
counterclockwise). Open 1/2 turn only.
platform and lock wheelchair
brakes.
UP (TO RAISE):
2. Press
entire platform reaches
ground level and outer
1. Close hand pump valve
barrier unfolds fully.
(turn clockwise).
3. Unlock wheelchair brakes
and unload passenger from
2. Insert handle in pump
platform.
and stroke platform
TO LOAD PASSENGER:
reaches floor level.
1. Load passenger onto
TO FOLD PLATFORM:
platform and lock wheelchair
brakes.
Insert handle in
2. Press
outer barrier up and raise
pump and stroke.
platform to floor level.
3. Unlock wheelchair brakes
Note: Close valve
and unload passenger from
platform.
before operating
electric pump.
TO FOLD PLATFORM:
Press
platform stops. Release
switch.
DOT — Public Use Lift
CLOSE DOOR(S)
32940
DOT — Public Use Lift
DOWN switch until
UP switch to fold
FOLD switch until
30695

Advertisement

Table of Contents
loading

Table of Contents