Lift Components - Braun NVL Vista 2 Series Operator's Manual

Lift Components

Refer to the Lift Terminology Il-
lustration on page 4.
Pump Module: The lift-mounted
pump module consists of the
hydraulic pump, the manual hand
pump, and electrical components
that power the lift electric/hydrau-
lic systems.
Hand-held Pendant Control:
The hand-held pendant control
is connected to the pump mod-
ule. The hand-held pendant is
equipped with two rocker switch-
es, (UNFOLD, FOLD, DOWN,
and UP). The momentary
switches activate the automatic
lift functions.
Page 6
Lift Terminology Lift Terminology
Lift Frame: The lift frame con-
sists of the base plate, threshold
warning plate, towers, parallel
arms, vertical arms, platform
pivot arms and handrails. Two
main hydraulic cylinders are
housed in the parallel arms. The
electrical/hydraulic powered lift
frame components mechanically
unfold, lower, raise and fold the
lift platform assembly.
Platform Assembly: The lift
"stacking" platform assembly is
made up of an inboard platform
section and an outboard platform
sections (each section consist-
ing of a steel tubing frame with
grating surface). The inner
roll stop/bridge plate assembly
(IB) is mounted on the inboard
platform section. The outboard
platform section is equipped with
the outer barrier.
Lift-Tite ™ Latches: The spring-
loaded latches prevent the
platform from unfolding from the
stowed position in the event of
platform drift. Further details
regarding Lift-Tite ™ latches are
provided on pages 16 and 17.
Outer Barrier: The spring-loaded
automatic outer barrier (outboard
roll stop) provides a ramp for
wheelchair loading and unloading
at ground level. Photos and
further details regarding the outer
barrier are provided in the Opera-
tion Notes and Details section
(pages 19-21).