1. Bolt and washer
2. Disconnect the headlight coupler,
and then remove the headlight
bulb cover.
1. Headlight coupler
2. Headlight bulb cover
3. Unhook the headlight bulb holder,
then remove the burnt-out bulb.
Periodic maintenance and adjustment
1
1. Headlight bulb holder
2. Headlight bulb
4. Place a new headlight bulb into
position, then secure it with the
bulb holder.
5. Install the headlight bulb cover,
1
then connect the coupler.
TIP
When installing the headlight bulb cov-
er, make sure the arrow mark faces up-
wards.
2
6-33
1
2
1. Arrow mark
6. Install the headlight unit as shown,
and then install the washer and
bolt on each side.
7. Have a Yamaha dealer adjust the
headlight beam if necessary.
1
6