Instrument and control functions
TIP
Make sure that the screwdriver is se-
curely positioned between its holders,
and then position the cable loops to-
ward the middle of the screwdriver be-
3
fore installing the passenger seat.
1
2
3
1. Helmet
2. Helmet holding cable
3. Screwdriver
4. Holder
5. Install
the
passenger
WARNING! Never ride with a
helmet attached to the helmet
holder, since the helmet may hit
objects, causing loss of control
and possibly an accident.
To release a helmet from the helmet
holding cable
1. Remove the passenger seat.
2. Remove the screwdriver, then re-
move the helmet holding cable
from the helmet.
3. Store the cable under the seat by
hooking the cable loops over the
screwdriver, install the screw-
driver in its original position, and
then hook the helmet holding ca-
ble over the hook on the bottom of
4
the passenger seat.
1
seat.
1. Screwdriver
2. Helmet holding cable
3. Hook
4. Install the passenger seat.
[EWA10162]
Storage compartment
The storage compartment is located as
shown.
1. Storage compartment cover
2
3
1. Storage compartment
3-21
EAU84080
1
1