Yamaha MT-07 2019 Owner's Manual page 22

Instrument and control functions
Tachometer
3
1
1. Tachometer
2. Tachometer red zone
The tachometer allows the rider to
monitor the engine speed and keep it
within the ideal power range.
NOTICE
Do not operate the engine in the ta-
chometer red zone.
Red zone: 10000 r/min and above
Clock
2
1. Clock
The clock uses a 12-hour time system.
When the main switch is not in the
"ON" position, the clock can be viewed
for 10 seconds by pushing the left set
ECA10032
button.
To set the clock
1. Turn the key to "ON".
2. Push the left set button and right
set button together for two sec-
onds. The hour digits will start
flashing.
3. Use the right set button to set the
hours.
4. Push the left set button, and the
minute digits will start flashing.
5. Use the right set button to set the
1
6. Push the left set button and then
Fuel meter
1. Fuel meter
The fuel meter indicates the amount of
fuel in the fuel tank. The segments of
the fuel meter disappear from "F" (full)
towards "E" (empty) as the fuel level
decreases. When the last segment of
the fuel meter starts flashing, refuel as
soon as possible.
TIP
The fuel meter is equipped with a self-
diagnosis function. If a problem is de-
tected in the fuel meter electrical cir-
3-7
minutes.
release it to start the clock.
1