Replacing the power-adapter
port
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your
computer, follow the instructions in
computer. For more safety best practices, see the Regulatory
Compliance home page at www.dell.com/regulatory_compliance.
Procedure
1
Place the power-adapter port into the slot on the palm-rest assembly.
2
Align the screw hole on the power-adapter port with the screw hole on
the palm-rest assembly.
3
Replace the screw that secures the power-adapter port to the palm-rest
assembly.
4
Connect the power-adapter port-cable to the system board.
Post-requisites
1
Replace the
2
Replace the
3
Replace the battery.
4
Replace the
74
display
assembly.
wireless
card.
base
cover.
computer. After working inside your
After working inside your